Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH





(a) Set the seat cushion heater in place with the name stamp side facing the seat cushion cover.

Text in Illustration





(b) Install the seat cushion heater with new tack pins.





(c) Connect the wire harness to the seat cushion cover.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER Reassembly

3. INSTALL SEAT CUSHION COVER WITH PAD

(a) Install the seat cushion cover with pad to the seat cushion spring.

(b) Connect the seat heater connector and attach the 3 wire harness clamps.

(c) Attach the hooks.

(d) Connect the airbag wire harness.

(e) Attach the fastening tape to close the cover.

(f) Connect the seat heater connector and attach the wire harness clamp.

4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH Installation

5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH Reassembly

6. INSTALL LUMBAR SWITCH ASSEMBLY Installation

7. INSTALL FRONT POWER SEAT SWITCH LH Reassembly

8. INSTALL FRONT SEAT CUSHION SHIELD LH Reassembly

9. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

10. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

11. INSTALL FRONT SEAT ASSEMBLY

(a) Install the front seat assembly Installation.