Reassembly

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY





1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Attach the 3 claws to install the ECU to the transmission floor shift.
(b) Connect the shift lock solenoid connector.






2. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Install the pattern select switch to the position indicator housing and attach the 2 claws.






3. INSTALL INTEGRATION CONTROL & PANEL SUB-ASSEMBLY
(a) Install the integration control & panel to the position indicator housing with the 5 screws.






4. INSTALL SHIFT LOCK RELEASE BUTTON
(a) Install the spring and shift lock release button to the lower position indicator housing and attach the 2 claws.






5. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Insert the indicator light wire to the lower position indicator housing and attach the claw.
(b) Attach the indicator light wire connector to the lower position indicator housing.






6. INSTALL POSITION INDICATOR SLIDE COVER
(a) Install the No. 2 position indicator slide cover to the position indicator slide cover.
(b) Install the position indicator slide cover together with the No. 2 position indicator slide cover to the lower position indicator housing.
NOTICE:
Make sure the protrusions of the position indicator slide cover are facing rearwards.





7. INSTALL POSITION INDICATOR LENS
(a) Attach the 4 claws to install the position indicator lens to the lower position indicator housing.






8. INSTALL LOWER POSITION INDICATOR HOUSING
(a) Install the lower position indicator housing to the position indicator housing with the 4 screws.






9. INSTALL CONSOLE BOX POCKET
(a) Install the console box pocket to the position indicator housing with the 2 screws.
(b) Attach the integration control & panel connector.






10. INSTALL SWITCH WIRE
(a) Connect the 5 connectors and attach the 3 clamps to install the switch wire to the position indicator housing.
11. INSTALL SHIFT LOCK RELEASE BUTTON COVER