Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION





1. INSTALL STEERING WHEEL ASSEMBLY
(a) Align the matchmarks on the steering wheel assembly and steering main shaft assembly.
(b) Install the steering wheel assembly set nut.
Torque: 50 Nm (510 kgf-cm, 37 ft-lbf)






2. INSTALL STEERING SHAKE DAMPER
(a) Install the steering shake damper with 2 screws.
Torque: 2.4 Nm (25 kgf-cm, 21 in-lbf)






3. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Install the cruise control main switch with the 2 screws.
(b) Connect the connector.
4. INSTALL STEERING PAD Installation

5. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

6. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Repair Instruction - Customize Parameters.

8. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.