Removal

SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY: REMOVAL

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. REMOVE FRONT SEAT ASSEMBLY LH
(a) Remove the front seat assembly Removal.
3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Disassembly

4. REMOVE RECLINING POWER SEAT SWITCH KNOB Disassembly

5. REMOVE FRONT SEAT CUSHION SHIELD LH Disassembly

6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH Removal

7. REMOVE FRONT INNER SEAT CUSHION SHIELD LH Disassembly

8. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH Disassembly

9. REMOVE FRONT SEAT HEADREST SUPPORT Disassembly

10. REMOVE SEATBACK COVER WITH PAD

(a) w/o Climate Control Seat System:
Disconnect the seat heater connector and detach the 2 wire harness clamps.
(b) w/ Climate Control Seat System:

(1) Disconnect the seat heater connector and detach the 3 wire harness clamps.

(2) Detach the 2 claws and disconnect the duct.

(d) Remove the nut and seatback cover bracket from the seat frame.
(e) Remove the seatback cover with pad.
11. REMOVE SEAT CLIMATE CONTROL CONTROLLER (w/ Climate Control Seat System) Disassembly

12. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

(a) Remove the 4 springs.
(b) Detach the 4 hooks and remove the seatback spring.