Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

HINT:
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.





1. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
(a) Install the protector with 2 new grommets.
(b) Install the 2 screws.
2. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
HINT:
Use the same procedures described for the No. 2 luggage compartment side cover protector.





3. INSTALL REAR BUMPER ARM BRACKET LH
(a) Install the bumper arm bracket with the 2 bolts.
(b) Connect the connector.






4. INSTALL REAR BUMPER ARM BRACKET
HINT:
Use the same procedure to install the bumper arm bracket on the other side.

(a) Install the bumper arm bracket with the bolt.






5. INSTALL REAR NO. 2 BUMPER REINFORCEMENT
(a) Install the bumper reinforcement with the 2 bolts.






6. INSTALL REAR BUMPER SIDE SUPPORT LH
(a) Attach the 6 claws to install the bumper side support.
(b) Install the 3 screws.
7. INSTALL REAR BUMPER SIDE SUPPORT RH
HINT:
Use the same procedures described for the LH side.





8. INSTALL REAR UPPER BUMPER RETAINER LH
(a) Attach the 2 clips to install the bumper retainer.
9. INSTALL REAR UPPER BUMPER RETAINER RH
HINT:
Use the same procedures described for the LH side.

10. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH Installation

11. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.

12. INSTALL REAR BUMPER COVER
(a) w/ Intuitive Parking Assist System:
Connect the No. 2 frame wire connector.
(b) Attach the 16 claws to install the bumper cover.
(c) Install the 7 bolts, 6 screws and 2 clips.





(d) Open the tail gate and install the 4 clips.





(e) Close the tail gate.
13. INSTALL REAR NO. 1 BUMPER PLATE
(a) Attach the 20 claws to install the bumper plate.





14. INSTALL REAR QUARTER PANEL MUDGUARD LH Installation

15. INSTALL REAR QUARTER PANEL MUDGUARD RH Installation