Vehicle Position Mark is not Updated

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Vehicle Position Mark is not Updated

Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISPLAY
(a) Check if a touch scroll can be performed on the map display.
OK:
Touch scroll can be performed.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- Continue to next step.
2. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Navigation Check" mode and select "Vehicle Sensors" Operation Check.
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.
OK:
The readings are almost equal.
NG -- GO TO "VEHICLE SPEED SIGNAL CIRCUIT"
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE