Vehicle Position Mark Deviates Greatly

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Vehicle Position Mark Deviates Greatly

Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE

1. CHECK GPS MARK





(a) Check that the GPS mark is displayed.
OK:
GPS mark is displayed.
NG -- GO TO "GPS MARK IS NOT DISPLAYED"
OK -- Continue to next step.
2. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Navigation Check" mode and select "Vehicle Sensors" Operation Check.
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.
OK:
The readings are almost equal.
NG -- GO TO "VEHICLE SPEED SIGNAL CIRCUIT"
OK -- Continue to next step.
3. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Check that the display changes between ON and OFF according to the shift lever position (P and R).
OK:





HINT:
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG -- GO TO "REVERSE SIGNAL CIRCUIT"
OK -- END