Removal

NAVIGATION / MULTI INFO DISPLAY: DISPLAY AND NAVIGATION ASSEMBLY (w/ Navigation System): REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

5. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY






(a) Remove the 2 screws and 2 bolts.






(b) Pull the radio receiver to detach the 2 claws and 4 clips on the backside of the display.
(c) Disconnect the connectors and remove the display.
6. REMOVE NO. 1 RADIO RECEIVER BRACKET






(a) Remove the 3 bolts and bracket.
7. REMOVE NO. 2 RADIO RECEIVER BRACKET






(a) Remove the 3 bolts and bracket.