Removal

AUDIO / VIDEO: STEREO JACK ADAPTER ASSEMBLY: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY






(a) Detach the 2 claws and remove the stereo jack adapter.
6. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY Removal

7. REMOVE REMOTE CONTROL ADAPTER ASSEMBLY






(a) Remove the 2 screws and adapter.