C1AEC

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: C1AEC: Front Sensor Communication Malfunction

DTC C1AEC - Front Sensor Communication Malfunction

DESCRIPTION

This DTC is stored when there is an open or short circuit in the communication line between the front sensors and the ECU, or when there is a malfunction in a front sensor.






WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC
(a) Clear the DTCs Intuitive Parking Assist System.
(b) Check for DTCs Intuitive Parking Assist System.

Result





B -- USE SIMULATION METHOD TO CHECK
A -- Continue to next step.
2. CHECK PARKING ASSIST ECU





(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPLACE PARKING ASSIST ECU
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (NO. 1 ULTRASONIC SENSOR LH - PARKING ASSIST ECU)





(a) Disconnect the B4 sensor connector.
(b) Disconnect the F37 ECU connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (NO. 1 ULTRASONIC SENSOR LH - NO. 1 ULTRASONIC SENSOR RH)





(a) Disconnect the B4 and B3 sensor connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK FOR DTC
(a) Clear the DTCs Intuitive Parking Assist System.
(b) Check for DTCs Intuitive Parking Assist System.

Result





B -- USE SIMULATION METHOD TO CHECK
A -- Continue to next step.
6. INSPECT NO. 1 ULTRASONIC SENSOR LH





(a) Disconnect the B4 sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPLACE NO. 1 ULTRASONIC SENSOR LH
OK -- Continue to next step.
7. CHECK FOR DTC
(a) Clear the DTCs Intuitive Parking Assist System.
(b) Check for DTCs Intuitive Parking Assist System.

Result





B -- END
A -- Continue to next step.
8. REPLACE NO. 1 ULTRASONIC SENSOR RH
(a) Replace the No. 1 ultrasonic sensor RH with a normally functioning sensor Removal.
NEXT -- Continue to next step.
9. CHECK FOR DTC
(a) Clear the DTCs Intuitive Parking Assist System.
(b) Check for DTCs Intuitive Parking Assist System.

Result





B -- END
A -- REPLACE PARKING ASSIST ECU