Power Steering Fluid Reservoir: Service and Repair

Power Steering Fluid Reservoir
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures

Removal
1 Remove the power steering fluid reservoir cap.
2 Using a suitable syringe, remove the power steering fluid from the power steering fluid reservoir.





CAUTION: Be prepared to collect escaping fluids.

CAUTION: Make sure that all openings are sealed. Use new blanking caps.
3 Remove the power steering fluid reservoir.

Installation
1 To install, reverse the removal procedure.
2 Fill and bleed the power steering system.
For additional information, refer to Power Steering System Bleeding Service and Repair