Diagnosis Procedure

POWER WINDOW MOTOR


REAR RH : Description

Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window switch RH.




POWER WINDOW MOTOR


REAR RH : Diagnosis Procedure

1.CHECK REAR POWER WINDOW MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear power window motor RH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor RH harness connector and ground.





Is the measurement value within the specification?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.





4. Check continuity between rear power window switch RH harness connector and ground.





Is the inspection result normal?
YES - Replace rear power window switch RH. Refer to Removal and Replacement.
NO - Repair or replace harness.
3.CHECK REAR POWER WINDOW MOTOR RH
Check rear power window motor RH. Refer to Component Inspection.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace rear power window motor RH. Refer to Removal and Replacement.
4.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END