Power Window Switch: Service and Repair

POWER WINDOW MAIN SWITCH


Removal and Installation


REMOVAL
1. Remove the power window main switch finisher (2). Refer to Removal and Installation.





2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.

triangle: pawl


CAUTION:
Do not fold the pawl of power window main switch finisher.

NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION
Install in the reverse order of removal.

NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to Special Repair Requirement.