Front Window Anti-Pinch

POWER WINDOW MOTOR


REAR LH : Diagnosis Procedure

1.CHECK REAR POWER WINDOW MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear power window motor LH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor LH harness connector and ground.





Is the measurement value within the specification?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH connector.
3. Check continuity between rear power window switch LH harness connector and rear power window motor
LH harness connector.





4. Check continuity between rear power window switch LH harness connector and ground.





Is the inspection result normal?
YES - Replace rear power window switch LH. Refer to Front Window Anti-Pinch.
NO - Repair or replace harness.
3.CHECK REAR POWER WINDOW MOTOR LH
Check rear power window motor LH. Refer to Front Window Anti-Pinch.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace rear power window motor LH. Refer to Removal and Installation.
4.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END