Transfer Cover Oil Seal Replacement

Transfer Cover Oil Seal Replacement

Special Tools Required

- Oil Seal Driver Attachment, 65 mm 07JAD-SH3010A
- Driver Handle, 15 x 135L 07749-0010000

1. Remove the transfer assembly Transfer Assembly Removal.

2. Remove the transfer cover (A) from the transfer housing (B), then remove the O-ring (C) from the transfer cover.






3. Remove the oil seal (A) from the transfer cover.






4. Install the oil seal (A) in the transfer cover (B) to a height (C) of 0-1 mm (0-0.04 in) above the transfer cover surface using the driver handle and the 65 mm oil seal driver attachment.






5. Install a new O-ring (A) on the transfer cover (B), then install the transfer cover on the transfer housing (C).






6. Install the transfer assembly Transfer Assembly Installation.