Rear Bumper Bracket: Service and Repair

Bumper Bracket - Rear

Removal and Installation

1. Remove the rear bumper beam. For additional information, refer to Bumper - Rear, Beam Bumper - Rear, Beam.

2. Remove the bolt and nut from the outer bumper bracket-to-inner bumper bracket.
- To install, tighten to 115 Nm (85 lb-ft).





3. Remove the 2 bolts from the inner bumper bracket-to-frame and remove the inner bumper bracket.
- To install, tighten to 115 Nm (85 lb-ft).





4. To install, reverse the removal procedure.