Fuel Rail: Service and Repair

REMOVAL
WARNING:
^ DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
^ FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING. BEFORE WORKING ON OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL SYSTEM PRESSURE MUST BE RELIEVED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

1. Relieve the fuel pressure.
2. Remove the upper intake manifold. For additional information, refer to Engine.







3. Disconnect the fuel injector electrical connectors.







4. Disconnect the fuel damper vacuum line.
5. Disconnect the fuel line.







6. Remove the fuel injection supply manifold.
7. Remove and discard the fuel injection supply manifold gasket.


INSTALLATION
1. To install, reverse the removal procedure.