Clockspring - Installation

INSTALLATION





1. Install the clockspring onto the multifunction switch and make sure the latches (2) are fully seated.
2. Connect the clockspring to the instrument panel harness, ensure wiring is properly routed. Then check that the connectors, locking tabs are properly engaged and the halo lamp wire is in position.





3. Install steering column shrouds.
4. Install steering wheel ensuring the flats on hub align with the clockspring Installation. Pull the horn and airbag leads through the larger slot. Ensure leads do not get pinched under the steering wheel.
5. Connect the horn lead wire and the driver airbag lead wire to the airbag.
6. Install the driver airbag Driver Air Bag - Installation.

WARNING: Do not connect the battery negative cable. Component Tests and General Diagnostics first. Serious or fatal injury may result if the system test is not performed first.

7. Place battery access cover into place and install four bolts.
8. Close deck lid.