Rear Stabilizer Bar - Installation

INSTALLATION





1. Install the rear stabilizer bar into the vehicle.
2. Raise the rear differential housing and install the four bolts (1) attaching it to the vehicle. Tighten to 90 Nm (66 ft. lbs.).




3. Install the rear spring (1). Rear Spring - Installation.




4. Install the rear shock (1). Installation.




5. Loosely install the rear stabilizer clamps (1-3).




6. Install the rear stabilizer bar links (2) to the rear control arm. Tighten to 30 Nm (22 ft. lbs.).




7. Tighten the rear stabilizer clamp nuts (1). Tighten to 20 Nm (15 ft. lbs.).




8. Install the propeller shaft to the rear differential carrier. Propeller Shaft - Installation.




9. Install the rear parking brake cables (2) to the parking brake equalizer (1). Parking Brake Cable - Installation.




10. Install the rear brake hoses (1) to the rear brake calipers. Brake Lines - Installation.




11. Install the rear wheel speed sensors (2). Rear Wheel Speed Sensor - Installation.
12. Install the wheel and tire assembly. Procedures.