Trim Replacement - Third Pillar Right
TRIM REPLACEMENT - THIRD PILLAR RIGHTTOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Clip Remover.
REMOVAL PROCEDURE
1. Remove the C- pillar retaining screw.
2. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.
INSTALLATION PROCEDURE
1. Install the panel to the vehicle:
1.1. Align the C- pillar retaining clips with the holes in the body.
1.2. Press the panel in order to seat the fasteners into place.
2. Install the C- pillar retaining screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the C- pillar retaining screw to 2 N.m (18 lb in).