Trim Replacement - Third Pillar Left
TRIM REPLACEMENT - THIRD PILLAR LEFTTOOLS REQUIRED
J 38778Door Pad Trim and Garnish Clip Remover
REMOVAL PROCEDURE
1. Remove the seat belt upper mount.
2. Remove the retaining screw.
3. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.
INSTALLATION PROCEDURE
1. Install the panel to the vehicle:
1.1. Align the retaining clips with the holes in the body.
1.2. Press the panel in order to seat the fasteners into place.
2. Install the retaining screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the retaining screw to 2 N.m (18 lb in).
3. Install the seat belt upper mount.