Parking Brake Lever: Service and Repair

Parking Brake Lever Mounting:

Remove or Disconnect
1. Release the parking brake.
2. Negative battery cable. Refer to Starting and Charging.
3. Release handle.
4. Connector from parking brake switch.
5. Bolts.
6. Parking brake cable from lever.
^ Locating tab on lever must be straightened to release cable.
7. Lever assembly.

Install or Connect
1. Parking brake cable to the lever assembly.
^ Bend locating tab over cable.
2. Lever assembly.
3. Bolts.

^ Tighten bolts to 24 Nm (18 ft. lbs.).

4. Connector to parking brake switch.
5. Release handle.
6. Negative battery cable. Refer to Starting and Charging.
7. Check the adjustment. Refer to Parking Brake, Adjustment. Adjustments