Battery Energy Control Module Wiring Harness Replacement

Battery Energy Control Module Wiring Harness Replacement

Removal Procedure




1. Remove the battery energy control module. Refer to Battery Energy Control Module Replacement (Battery Energy Control Module Replacement).
2. Disconnect the electrical connectors (1).
3. Remove the wire harness nuts (2).




4. Remove the wire harness screws (1).




5. Remove the battery energy control module wiring harness (1).

Installation Procedure




1. Install the battery energy control module wiring harness (1).




2. Install the wire harness screws (1) and tighten to 8 Nm (71 lb in).




3. Connect the electrical connectors (1).
4. Install the wire harness nuts (2) and tighten to 8 Nm (71 lb in).
5. Install the battery energy control module. Refer to Battery Energy Control Module Replacement (Battery Energy Control Module Replacement).