Knee Bolster Bracket Replacement - Left

Knee Bolster Bracket Replacement - Left

Removal Procedure




1. Remove the left instrument panel (IP) insulator.
2. Remove the steering column filler panel.
3. Remove the bracket bolts from the IP driver knee bolster at the IP lower trim panel.




4. Remove the bracket bolts from the IP knee bolster at the instrument carrier. Remove the IP knee bolster bracket.

Installation Procedure




1. Align the knee bolster bracket to the IP.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the knee bolster bracket bolts to the instrument carrier in the sequence shown.

Tighten the bolts to 10 N.m (89 lb in).




3. Install the knee bolster bracket bolts which secure the bracket to the IP lower trim panel.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the steering column filler panel.
5. Install the left IP insulator.