Park System Components Disassemble

1. Use a drift pin and a mallet in order to remove the pin (702) connecting the detent lever to the shaft.

Important: Do not pry on the case flange. Use a piece of wood or other protective material when you remove the following part.





2. Use a long flat blade screwdriver in order to remove the pin (713) connecting the manual shaft to the case.





3. Hold the detent lever (703) and pull the manual shaft park lock actuator rod (704) out of the driven sprocket support (600) and the case (15).
4. Remove the manual detent lever (703) and the manual valve rod (701).