Rear Suspension

Stabilizer Shaft Link Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Description and Operation).
2. Remove the stabilizer shaft link bolts.
3. Remove the stabilizer shaft link insulators and spacer.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Loosely install the stabilizer link insulators, spacer, nut and bolt.

Tighten the stabilizer shaft link nut to 15 Nm (11 lb ft).

2. Lower the vehicle.