Parking Brake Warning Lamp: Service and Repair

Park Brake Warning Lamp Switch Replacement

Removal Procedure

1. Remove the left sound insulator panel. Refer to Closeout/insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
2. Disconnect the electrical connector from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch retaining bolt.
4. Remove the park brake warning lamp switch.

Installation Procedure

1. Install the park brake warning lamp switch to the park brake lever assembly. Align the alignment pin to locator hole.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the park brake warning lamp switch retaining bolt.
Tighten
Tighten the bolt to 1.9 N.m (17 lb in).
3. Connect the electrical connector to the park brake warning lamp switch.
4. Install the left sound insulator panel. Refer to Closeout/insulator Panel Replacement - Left in Instrument Panel, Gages and Console.