Case Assembly Inspection

1. Inspect the components that are still on the transmission case for the following conditions:
- Loose, cross-threaded, or damaged pipe fittings on the transmission oil cooler.
- A loose, missing, or damaged transmission name plate.
2. Inspect the transmission case for the following conditions:
- Gasket sealing surfaces that are damaged or which have porosity.
- Bolt or screw holes that are stripped or damaged (repair with a thread insert).
- Damaged or porous case oil passages.
- Damaged snap ring grooves or housing splines.
- Loose, missing, or damaged band anchor pins.
- Damaged or porous case surfaces.
- Plugged drain back holes for the torque converter oil seal.





3. Inspect the components that are still on the transmission case for the following conditions:
- A loose, plugged, or damaged transmission vent assembly.
- A loose, cross-threaded, or damaged oil pressure test hole plug.