Ribbed Belt Drive Overview

Ribbed Belt Drive Overview






1 Ribbed Belt

• Check for wear

• Before removing, mark the direction of rotation using chalk or a felt-tip pen.

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt

• Do not kink

• When installing, make sure it is seated correctly on the ribbed belt pulleys

2 Bolt

• 20 Nm plus an additional 90° turn

• Replace

3 Generator

4 Bolt

5 Idler Roller Cover

6 Idler Roller for Ribbed Belt

• 40 Nm

7 Bolt

• Tightening specification => [ (Item 2) Bolt ] Coolant Pump, Coolant Thermostat and Connecting Piece Overview

8 Coolant Pump Ribbed Belt Pulley

9 Bolt

• Tightening specification => [ (Item 1) Bolt ] Coolant Pump, Coolant Thermostat and Connecting Piece Overview

10 Coolant Pump

• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump

11 Bolt

12 Bolt

13 Power Steering Pump Mount

14 Slide Bushing

15 Bolt

16 Bolt

17 Power Steering Pump

18 Power Steering Pump Ribbed Belt Pulley for the Power Steering

19 Bolt

20 Ribbed Belt Tensioning Damper

• 40 Nm

• Removing and installing, refer to => [ Ribbed Belt Tensioner ] Service and Repair

21 Air Conditioning (A/C) Compressor Bracket

• Be careful of the alignment bushings when installing

22 Bolt

• 20 Nm

23 A/C Compressor

• Do not remove or disconnect refrigerant lines

• Be careful of the alignment sleeves - 25 - when installing

24 Bolt

25 Alignment Bushing

• Quantity: 2

26 Tensioner Cover

27 Vibration Damper with Ribbed Belt Pulley

• Removing and installing, refer to => [ Vibration Damper with Ribbed Belt Pulley ] Service and Repair

Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence





- Tighten the bolts - arrows - in a diagonal sequence in stages to 9 Nm.