Suction Jet Pump

Suction Jet Pump

Removing

Proceed as follows:

- Remove the input shaft. Refer to => [ Input Shaft ] Input Shaft.

- Remove the chain and disc set I. Refer to => [ Chain and Disc Set I ] Chain and Disc Set I.





- Remove the oil pipe - 1 -.

- O-ring - 2 - from the oil pipe.

- Remove the bolts - arrows -.





- Remove the suction jet pump from the guide and then pull it to the side - arrow 1 -.





- Tilt the suction jet pump out of the retaining pins - arrow 2 -.

- Remove the suction jet pump - arrow 3 -.





Installing

• Tightening specifications, refer to => [ Chain and Disc Set I Overview ] Chain and Disc Set I Overview.

Installation is in reverse order of removal.