Clockspring Assembly / Spiral Cable: Service and Repair

Airbag Spiral Spring/Return Spring With Slip Ring

Special tools, testers and auxiliary items required

• Feeler gauge

Removing

• Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.

- Remove steering column trim.

- Remove steering column electronic systems control module (J527). Refer to => [ Steering Column Electronic Systems Control Module ] Service and Repair.

- Carefully release fasteners - arrows - and pull Airbag Spiral Spring/Return Spring With Slip Ring - 1 - off steering column switch module.





Installing

Install in reverse order of removal, observing the following:

- Make sure all fasteners and electrical connectors are properly engaged.