Power Take-Off Drive Chain

Power Take-Off Drive Chain

Special tools, testers and auxiliary items required

• Locking Pin (T40071)

Removing

• During installation, all cable ties must be re-installed at the same location.

- Remove timing chain lower cover. Refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover.

CAUTION!
Risk of destroying due to reversed running direction on a used drive chain.

• Paint arrows to mark the power take-off drive chain running direction so it can be installed again.

- Press the tensioning rail in direction of - arrow - and secure it with a Locking Pin (T40071).





- Remove bolt - 1 - and the power take-off drive chain.

• When removing, be careful of spring in drive spur gear shaft.

- Remove the bolts - 2 through 4 - and the chain tensioner.

- Remove the power take-off drive chain.

Installing

• Tightening specifications. Refer to => [ Power Take-Off Drive Chain Assembly Overview ] Power Take-Off Drive Chain Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace the gasket.

• Secure all hose connections with hose clamps appropriate for the model.

- Install timing chain lower cover. Refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover.

- Fill the engine oil.

- Fill with coolant. Refer to => [ Filling ] Procedures.