Lower Left Coolant Pipe

Lower Left Coolant Pipe

Special tools, testers and auxiliary items required

• Drip tray for workshop crane (VAS 6208) or drip tray (V.A.G 1306)

• Hose clamp pliers (V.A.G 1921)

Removing

- Activate vehicle lifting mode.

- Remove cover above coolant reservoir - arrows -.





CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam i.e. hot coolant may escape when opening.

- Open cap of coolant expansion tank.

- Loosen quick-release fasteners - 1 - and remove front noise insulation.





- Place drip tray for workshop crane (VAS 6208) or drip tray (V.A.G 1306) under engine.





- Disconnect coolant hose - 2 - from lower left coolant pipe and drain the coolant.

- Remove bolt - 1 - and nut - 3 -.

- Disconnect lower left coolant pipe from coolant hose - 4 -.

Installing

Installation is in reverse order of removal, note the following:

• Secure all hose connections using hose clamps appropriate for the model type.

- Fill with coolant => [ Filling ] Procedures.

- Deactivate the vehicle lifting mode.

Tightening Specifications