Trailer Hitch

Trailer Hitch

- Bumper removed.

- Slide trailer hitch crossmember into longitudinal member as shown.





- Tightly bolt crossmember - 3 - on left and right with multi-point bolts - 1 -.





- Tighten bolts to 30 Nm.

- Holding plate - 2 - for connector coupling.

- Secure power outlet - 2 - with bolts - 3 - to holding plate - 1 -.





- Tighten bolts - 3 - to 2.5 Nm.

- Screw in bolt - 1 - completely through longitudinal member into threaded plate at bottom on crossmember - 2 -.





CAUTION!
Bolt must not be driven through longitudinal member by hammer blows.

- Tighten bolt to 60 Nm.

- Connector coupling - 3 - to holding plate.

- Install bumper.