Damper Unit

Damper Unit

Special tools, testers and auxiliary items required

• Counter-Holder Tool (10 - 201)

Removing

• The transmission is removed.

- Insert Counter-Holder Tool (10 - 201) to loosen bolts - arrow -.





- Remove the bolts - 1 - and disconnect the damper unit - A - from the flywheel - B -.





Installing

Installation is in reverse order of removal, note the following:

• The damper unit part number is assigned to the transmission code.

- Align the damper unit - A - on the flywheel - B -.

• Both tabs - 2 - must match up with each other.

- Install the bolts - 1 - hand-tight and then tighten diagonally.

Tightening Specifications