Flywheel

Flywheel

Special tools, testers and auxiliary items required

• Counter-holder tool (10 - 201)

Removing

Proceed as follows:

• Transmission removed.

- Remove damper unit. Refer to => [ Damper Unit ] Damper Unit.

- Mark position of flywheel to the crankshaft for installation later.

- Insert counter hold tool (10 - 201) to loosen bolts.





- Remove bolts - arrow - and flywheel.

Installing

Installation is in reverse order of removal, noting the following:

• Replace the flywheel bolts.

- Re-position counter hold tool (10 - 201) to tighten the bolts.

- Install damper unit. Refer to => [ Damper Unit ] Damper Unit.

Tightening specifications