Rear Wiper Motor

Rear Wiper Motor

Removing






- Disconnect the negative battery cable. Refer to => [ Battery, Disconnecting and Connecting ] Tools and Equipment.

- Remove the rear wiper arm. Refer to => [ Rear Wiper Arm ] Rear Wiper Arm.

- Open the liftgate.

- Remove the liftgate trim panel..

- Disconnect the wire connector from the rear wiper motor.

- Remove the nuts securing the rear wiper motor to the liftgate.

- Remove the rear wiper motor (1) from the liftgate.

Installing






- Position the rear wiper motor (1) to the liftgate.

- Install the nuts securing the motor and tighten the nuts to 10 Nm (89 in lbs).

- Connect the wire harness connector.

- Install the liftgate trim panel..

- Close the liftgate.

- Install the rear wiper arm. Refer to => [ Rear Wiper Arm ] Rear Wiper Arm.

- Connect the negative battery cable. Refer to => [ Battery, Disconnecting and Connecting ] Tools and Equipment.