Third Row Power Folding Bench Seat, Headrest Sleeve

Headrest Sleeve

Removing

- Refer to => [ Power Folding Seat Component Overview ] Power Folding Seat Component Overview, for the power folding seat component overview and call outs.

- Remove the headrest (14) from the seat back. Refer to => [ Headrest ] Headrest.

- Unzip the back cover to gain access to the headrest sleeves (15 and 16).

- Reach up under seat back frame (17) and pinch together the two barbs located on each head restraint sleeve (15 and 16).

- With the retainer barbs pinched together, pull the two headrest sleeves (15 and 16) upward and out of the seat back.

Installing

- Refer to => [ Power Folding Seat Component Overview ] Power Folding Seat Component Overview, for the power folding seat component overview and call outs.

- Install the two headrest sleeves (15 and 16) into the seat back until the sleeves are in the locking position. Take care to install the sleeves in the original positions.

- Zip the seat back cover.

- Install the headrest (14) to the seat back. Refer to => [ Headrest ] Headrest.