Valve Body Overview
Valve Body Overview
1 ATF inspection plug
• ATF level, checking and topping off => [ ATF Level, Checking ] Testing and Inspection
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
2 Oil seal
• Always replace
3 Overflow tube
• Remove to drain ATF
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
4 Oil Pan
• Removing and installing => [ Automatic Transmission Fluid Pan ] Service and Repair
5 Bolt
• Tighten oil pan bolts in several stages in a diagonal sequence
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
6 Gasket
• With spacers (quantity: 8)
• Check before installing
• Replace brittle, cracked or deformed seals
7 Magnet
• Qty. 2, in depressions of oil pan
• Clean before installing oil pan
8 Bolt
• For mounting valve body on transmission
• Qty. 12, various lengths => [ Bolt lengths and locations on the valve body ] Valve Body
• Always replace bolts
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
9 Bolt
• Quantity: 3
• For securing oil strainer to valve body
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
10 Oil Strainer
• Removing and installing => [ Oil Strainer ] Service and Repair
11 Valve Body
• Removing => [ Valve Body, Removing ] Valve Body
• Installing => [ Valve Body, Installing ] Valve Body
12 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
13 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
14 Transmission Input Speed (RPM) Sensor (G182)
• Removing and installing => [ Transmission Input Speed Sensor ] Transmission Input Speed Sensor
15 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
16 Transmission Output Speed (RPM) Sensor (G195)
• Removing and installing => [ Transmission Output Speed Sensor ] Transmission Output Speed Sensor
17 Transmission housing
• Here shown without oil cooler
18 Breather cap
19 Multi-Function Transmission Range Switch (F125)
• Removing => [ Multi-Function Transmission Range Switch, Removing ] Multi-Function Transmission Range Switch, Removing
• Installing => [ Multi-Function Transmission Range Switch, Installing ] Multi-Function Transmission Range Switch, Installing
• Adjusting => [ Multi-Function Transmission Range Switch, Adjusting ] Adjustments
20 Transmission Fluid Temperature Sensor (G93)
• Integrated into the wiring harness
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
• Removing and installing => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair
• Line routing => [ Line Routing, Connectors and Bracket on Valve Body ] Line Routing, Connectors and Bracket on Valve Body
21 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
22 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
23 Sensor wiring harness
• With Transmission Fluid Temperature Sensor (G93)
• For Transmission Input Speed (RPM) Sensor (G182)
• For Transmission Output Speed (RPM) Sensor (G195)
• Always replace seal on the connector housing
• Removing and installing => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair
• Line routing => [ Line Routing, Connectors and Bracket on Valve Body ] Line Routing, Connectors and Bracket on Valve Body
24 Oil seal
• Always replace
25 ATF drain plug
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
26 Selector lever
27 Washer
28 Nut
• Installation position: The centering collar faces washer => [ (Item 27) Washer ]
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls
29 Spring
30 Damper piston
31 Solenoid valve wiring harness
• Always replace seal on connector housing
• Removing and installing => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair
• Line routing => [ Line Routing, Connectors and Bracket on Valve Body ] Line Routing, Connectors and Bracket on Valve Body
32 Bolt
• Torque specification => [ Valve Body Tightening Specifications ] Valve Body Tightening Specifications - Gears, Hydraulic Controls