Steering Gear Assembly Overview, From MY 2009

Steering Gear Assembly Overview, from MY 2009





1 Universal Joint

2 Bolt

• M8 x 35

• 30 Nm

• Always replace after removal

3 Steering Gear

• With Power Steering Control Module (J500).

• With Electromechanical Power Steering Motor (V187).

• With Steering Torque Sensor (G269).

• Can be tested in Guided Fault Finding using the Vehicle diagnosis, testing and information system (VAS 5051B).

• Removing and installing, refer to => [ Steering Gear, from MY 2009 ] Steering Gear, From MY 2009.

4 Wheel Bearing Housing

5 Nut

• M12 x 1.5

• Tighten to 100 Nm, then loosen by 180° and tighten to 100 Nm again.

• Self-locking

• Always replace after removal.

6 Subframe

7 Bolt

• M10 x 70

• 50 Nm + 90° turn

• Always replace after removal.

8 Shield

9 TORX Bolt

• 6 Nm

• Self-tapping

10 Electrical Wiring