Overview 2

Selector mechanism, disassembling and assembling, 09D, 6 Speed A/T





1 - Selector lever handle

2 - Clip

3 - Trim strip

4 - Emblem
^ Self-adhesive

5 - Sleeve

6 - Cover
^ With selector indicator

7 - Printed circuit board
^ With Tiptronic Switch F189

8 - Cover strips/frame
^ Be careful of Tiptronic Switch F189 signal magnet in cover strips

9 - Line

10 - Shift lock solenoid N110

11 - Selector lever park position solenoid N380

12 - Bolt, 20 Nm
^ Qty.4

13 - Bracket

14 - Bracket

15 - Selector mechanism
^ With shift lock solenoid N 110 and selector lever park position solenoid N380
^ Can be removed upward

16 - Bolt
^ Adjusting

17 - Mounting bracket/cover
^ Can only be removed downward

18 - Lock washer
^ Always replace

19 - Selector lever cable
^ Adjusting

20 - Lock washer
^ Always replace

21 - Mounting bracket
^ For selector lever cable on transmission
^ When tightening, ensure bracket does not distort

22 - Bolt
^ Self-locking
^ Always replace
^ The threaded holes in the transmission for the bolts must always be cleaned. (e.g. with a thread tap)

Tightening torque:
^ M8 Bolt 23 Nm
^ M6 Bolt 10 Nm