Removal and Replacement

Poly V-belt, removing and installing

CAUTION! Observe safety notes.

Special tools, testers and auxiliary items required





^ Pin T10060

Removing
- Remove right side sound insulation tray.
- Mark direction of rotation of poly V-belt.





- Turn tensioning device in direction of arrow to relieve tension on poly V-belt.





- Lock tensioning element with retaining pin T10060.
- Remove poly V-belt.

Installing
- Installation is performed in reverse order of removal.

Note:
^ Before installing the poly V-belt, ensure that all ancillaries (Generator, air conditioning compressor, power steering pump) are secured tightly.
^ When installing the poly V-belt, check the direction of belt rotation and for proper seating of the belt in the pulleys.
^ For vehicles without air conditioning, put the poly V-belt over the Generator pulley last.
^ For vehicles with air conditioning, put the poly V-belt over the air conditioning compressor pulley last.

After completing repairs always:
- Start engine and check belt running.

Belt drive for vehicles without air conditioning:

Belt drive for vehicles without air conditioning

Belt drive for vehicles with air conditioning:

Belt drive for vehicles with air conditioning