Pedal Cluster

Exploded View Of Pedal Cluster:

Component Notes And Information

NOTE:
^ During Service procedures, refer to the illustration above and the notes below.
^ During removal and installation procedures, refer to the component location illustration above and component notes below.
^ Grease all mountings before installing with G 000 602 grease.

1 Securing clip
- Ensure securely seated
2 Pin
3 Brake servo push rod clevis
4 Self-locking hex nut
- Tighten to: 20 Nm (15 ft lb)
5 Brake pedal pivot pin
6 Brake pedal return spring
7 Return spring mounting tube
8 Brake pedal mounting bushing
9 Brake pedal
10 Clutch pedal
11 Pedal cluster mounting bracket
12 Clutch pedal pivot pin
13 Clutch pedal mounting bushing
14 Over-center spring mounting
15 Over-center spring
- Before removing, remove clutch pedal
16 Securing clip
- Ensure seated securely
17 Brake Light Switch
- Adjusting. Refer to Lighting and Horns

CAUTION: The brake pedal travel must not be restricted by additional floor coverings.