Without A/C

Heater, Disassembling And Assembling





The air distribution housing and its components. The fresh-air blower can be reached by removing the glovebox.

Virtually any other work on components of the air distribution housing, including the heater core or the A/C evaporator, requires discharging the A/C system, draining the engine coolant, and removing the instrument panel.Service and Repair

1 - Gasket
2 - Heat exchanger
- Gasket must be glued all around and free of gaps.
- If catches do not engage, secure heat exchanger with screws.
3 - Air distributor
- Do not disassemble further.
4 - Clamp
5 - Main shut-off flap
- Only in vehicles without A/C
6 - Air duct with main shut-off flap
- Do not disassemble further.
- Lever for flap for footwell vent and defrost cannot be disassembled.
7 - Fresh air blower series resistance with fuse -N24-
8 - Lever for temperature flap
9 - Screw for lever
1O - Lever for central flap
11 - Lever for main shut-off flap
12 - Fresh air blower -V2-
13 - Footwell vent.
14 - Cover for foot pedals