Front Wheel Speed Sensor Shielded Wire Resistance
DRIVER'S SIDE1. Turn ignition off.
2. Connect multimeter to terminal No. 1 and No. 7 of the ABS 35-pin connector.
3. Set multimeter to 200K Ohm scale.
4. If reading is not 20K to infinity, inspect shielded wire for damage. Replace as necessary.
PASSENGER'S SIDE
1. Turn ignition off.
2. Connect multimeter to terminal No. 1 and No. 5 of the ABS 35-pin connector.
3. Set multimeter to 200K Ohm scale.
4. If reading is not 20K to infinity, inspect shielded wire for damage. Replace as necessary.