Valve Block Right Front Solenoid Valves Operation

1. Turn ignition off.
2. Jumper the ABS 35-pin connector terminals No. 2, No. 15 and No. 34.
3. Raise and support front of vehicle.
4. Right front wheel must lock with brake pedal depressed.
5. Turn ignition on. When jumper wire is connected, do not leave ignition on longer than 60 seconds.
6. Right front wheel must rotate freely with brake pedal released.
7. Turn ignition off, then remove jumper wire.
8. If wheels do not rotate as specified, replace valve block.