Side Window With Intake Trim, Removing and Installing

Side Window With Intake Trim, Removing And Installing

Removing
- Remove seats and/or seat benches and remove loading floor, depending on equipment
- Remove headliner.
- Remove B-pillar upper trim, sliding door side.
- Remove C-pillar trim, sliding door side.
- Remove D-pillar trim, sliding door side.
- Remove rear side wall trim, sliding door side.







- Disconnect electrical plug connector - 1 -.
- Lift air duct - 2 - and swing out of the air intake - 3 - - arrow -.
- Pull air duct - 2 - down out of headliner.







- Remove screws - 1 -.
- Remove intake duct - 2 -.







- Remove nuts - 1 -.

Torque: 2.2 Nm (19 in.lb)

NOTE: Tightening torque for nuts - 1 - must be followed to in order to ensure proper air duct seal.

- Pull side window off vehicle.
- Reassemble in reverse sequence.