Oil Pump: Service and Repair

Oil pump, disassembling and assembling





1. Input shaft
- For operating oil pump
2. Oil pump housing
3. Bolt: Tighten to 25 Nm
4. Gears
5. Oil pump cover with pressure relief valve
- Opening pressure: 5.3 to 5.7 bar positive pressure
- Clean strainer if dirty
6. Bolt: Tighten to 10 Nm
- insert with safeguard material "D6"
7. Oil pressure pipe
- Coat with sealant AMV 1 88 001 02 at cylinder block and at oil pressure housing
8. Bolt: Tighten to 10 Nm
9. Seal
- Replace if damaged