Tail Lamp: Locations

Rear Lights, Assembly


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio.







1 - Housing
- Removing and installing See Fig. 1
2 - Gasket
3 - Back-up light bulb
- 12 V/21 W
4 - Rear turn signal bulb
- 12 V/21 W
5 - Double filament bulb for brake and tail lights
- 12 V, 21 W/5 W
6 - Bulb holder
7 - Hex nut M5 with washer

Fig. 1 Rear light housing, removing and installing







- Disconnect electrical connection from bulb holder.
- Remove hex nuts -arrows-.
- Release lugs -1- and remove housing by turning.
- Install in reverse order of removal