Installation (from 07/2011)

HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR (for Hatchback): INSTALLATION

1. INSTALL FRONT EVAPORATOR TEMPERATURE SENSOR (NO. 1 COOLER THERMISTOR)

(a) Install the front evaporator temperature sensor (No. 1 cooler thermistor) as shown in the illustration.





Installation Position:





Text in Illustration





NOTICE:
* Be sure to insert the sensor only once because reinserting it will not allow it to be firmly secured.
* When reusing the evaporator, insert the sensor one row next to the one that was used previously (*4 in the illustration).
* After inserting the sensor, do not apply excessive force to the wire.
* Directly insert the sensor until the edge of the plastic case "*5" comes into contact with the evaporator "*6".

2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY Reassembly (from 07/2011)

3. INSTALL COOLER EXPANSION VALVE Reassembly (from 07/2011)

4. INSTALL NO. 2 AIR DUCT Installation (from 07/2011)

5. INSTALL NO. 1 AIR DUCT Installation (from 07/2011)

6. INSTALL AIR CONDITIONER UNIT ASSEMBLY

Installation (from 07/2011)